Received Signal Strength in a Macrocell in Lagos Environs Using Finite Element Method

Authors

  • Shoewu O Department of Electronic and Computer Engineering, Faculty of Engineering Lagos State University, Epe Campus, Epe, Nigeria
  • Makanjuola N.T Department of Electronic and Computer Engineering, Faculty of Engineering Lagos State University, Epe Campus, Epe, Nigeria
  • Akinyemi L.A Department of Electronic and Computer Engineering, Faculty of Engineering Lagos State University, Epe Campus, Epe, Nigeria
  • Ogunlewe A.O Department of Electronic and Computer Engineering, Faculty of Engineering Lagos State University, Epe Campus, Epe, Nigeria

DOI:

https://doi.org/10.18488/journal.76/2015.2.2/76.2.47.64

Abstract

This paper presents an analysis of received signal strength in a macrocell in Lagos environment using Finite Element Method (FEM). In this paper, six different site locations were covered and subdivided into peri-urban, open suburban, dense urban, open urban, suburban and exurban areas. It was deduced that the experimental values obtained was favourably with the FEM predicted values with the mean prediction error ranging between 6.66dB to 12.89dB while that of standard deviation error is 2.99dB to 8.09dB.

Keywords:

Macrocell, Finite element method, Mean prediction error, Base station

Abstract Video

Downloads

Download data is not yet available.

Published

2015-05-25

How to Cite

O, S., N.T, M., L.A, A., & A.O, O. (2015). Received Signal Strength in a Macrocell in Lagos Environs Using Finite Element Method. Review of Computer Engineering Research, 2(2), 47–64. https://doi.org/10.18488/journal.76/2015.2.2/76.2.47.64

Issue

Section

Articles

Most read articles by the same author(s)